Grizzly BRM 51-2 BSA, Перевод оригинальной инструкции по эксплуатации

Страница: 88 / 176

88
GB
Operation
A certain level of noise exposure
caused by this device is unavoidable.
Rearrange noise-intensive works
to times approved and specified for
this purpose. Comply with the rest
periods and reduce the work period
down to the minimum. For your per -
sonal protection and the protection
of people near by, suitable hearing
protection must be worn.
Starting and Stopping the
Engine
Warning! Petrol is flammable.
Start the engine at least 3 m
away from the filling location.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
is touching neither objects nor the
ground.
For your safety: Stand behind the
device when starting it.
Regularly check petrol and oil level
(see „Initial Operation“) and refill in
due time.
Cold start:
1. Set petrol lever (22) to position
.
2. Pull the safety catch (3) towards
the handle bar and hold it.
3. Pull the starter cord (21).
4. When the engine starts, allow the
starter handle to slowly slide back
into the starter cable guide (20).
Warm start:
1. Set petrol lever (22) to position
.
2. Pull the safety catch (3) towards
the handle bar and hold it.
3. Pull the starter cord (21).
4. When the engine starts, allow
the starter handle to slowly slide
back into the starter cable guide
(20).
Knife stopping device:
• Regularly examine the knife stopping
device:
Release the safety loop (3). The
motor switches off and the knife is
braked. The knife must stop within 7
seconds.
Mowing
1. Start the engine (see ).
2. Set petrol lever (22) to position
.
3. Wheel drive :
On: Pull the drive catch (2)
towards the handle bar. The
mower moves forwards.
Off: Release the drive catch (2)
The equipment stops.
Set petrol lever (22) to position
for short breaks and to re -
duce noise
The change in motor revolutions
via both positions +
does not influence the speed of
the power wheels. They cannot be
regulated.