107
GB
• Before oiling, the chain bar must be
cleaned thoroughly, in particular the
teeth of the rail. Use a whisk and a dry
cloth for that.
• Oil the individual chain links with the
aid of an oil suction gun with pinpoint
tip (available in the specialist trade).
Place individual oil drops onto the ar-
ticulated links and onto the tooth tips
of the individual chain links.
Sharpening the saw chain
An incorrectly sharpened saw
chain increases the danger of
spring-back!
Use cut-protection gloves when
you are handling the chain or the
chain bar.
A sharp chain guarantees an op-
timal cutting performance. It eats
effortlessly through the wood and
leaves large, long wooden chips.
A saw chain is blunt if you have to
press the cutting equipment through
the wood and the wooden chips
are very small. In the case of a very
blunt saw chain, no chip cuttings
result at all, only sawdust.
• The sawing parts of the chain are
the cutting elements, which consist
of a cutting tooth and a depth limiting
projection. The vertical separation dis-
tance between these two determines
the sharpness depth.
• The following values must be noted in
sharpening the cutting teeth:
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
A
B
C
D
E
F
G
H
I
J
-
Sharp edge angle (30°)
- Breast angle (85°)
- Sharpness depth (0.65 mm)
- Round file diameter (4.0 mm)
Maintenance intervals
Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get op-
timum cutting performance and avoid accidents.
Maintenance Interval Table
Machine part
Action
Before every
use
After 10 hours
of operation
Komponenten der
Kettenbremse
Check, replace if required
Kettenritzel (24)
Check, replace if required
Saw chain
(5)
Check oil, regrind or replace
if required
Guide bar
(4)
Check, clean and oil
Guide bar
(4)
Turn around
Automatic oil
system
Check, clean oil aperture if
necessary
Содержание AKS 4035 Lion
Страница 172: ......
