153
GB
able to guide the sawing chain
(5) more easily onto the chain
sprocket (24). It is normal for
the sawing chain (5) to sag.
7. Pre-tension the sawing chain (5)
by turning the tensioning screw
(23) in a clockwise direction.
8. Put the chain wheel cover (15)
on. To do this, the lug on the
cover (15) must first be placed
in the notch provided on the
device. Tighten the fastening
screw (14) with light force only,
as the device must still be ten-
sioned.
Tensioning the saw chain
With a correctly tensioned chain you get
good cutting performance and a longer life.
An incorrectly tensioned chain
may break or spring off, leading
to danger of injury. Test the saw
before every start and the chain
tension after every hour of sawing.
The chain is correctly tensioned if it does not
sag at the rail underside and can be rotated
completely around with the gloved hand.
When the saw chain is tensioned with 9 N
(approx. 1 kg), the gap between the saw
chain and the guide rail may not be more
than 2 mm.
C
1. Ensure that the chain brake has
been released, that is, that the
chain brake lever (3) is pulled
up against the front grip (8).
2. Unscrew the fastening bolt (14).
3. To tighten the saw, turn the
chain adjustment ring (13)
clockwise. To loosen the ten-
sion, turn the chain adjustment
ring anti-clockwise.
4. Tighten up the fastening bolt
(14) again.
With a new saw chain, you must
readjust the chain tension after at
least 5 cutting operations.
Chain lubrication
The rail and chain must never be
without oil. If you operate the elec-
tric chainsaw with too little oil, the
cutting performance and the lifetime
of the saw chain is reduced, since
the chain becomes blunt faster.
You can identify a case of too little
oil where smoke development or
discoloration of the rail occurs.
The chainsaw is equipped with an auto-
matic oiling system. As soon as the motor
is speeded up, the oil also flows faster to
the chain bar (4).
Filling up with chain oil:
• Check the oil fill level and regularly top
up with oil ( 25).
• Use Parkside bio-oil; this product con
-
tains additives that reduce wear and
tear and does not damage the pump
system. bio-oil is available from our
Service-Center.
• If you have no Grizzly bio-oil available,
use chain lubrication oil with low adhe-
sive additive content.
D
1. Unscrew the oil fill cap (2) and fill
up with chain oil.
Содержание AKS 2440 Lion
