t20568 1
1
⁄
4
" brad nailer
-1
-
10. use proper air hose for the
tool. make sure your air hose is in
good condition and is long enough to
reach your work without stretching.
11. Wear proper apparel. do not
wear loose clothing, gloves, neck-
ties, rings, bracelets, or other jew-
elry which may get caught in moving
parts. non-slip footwear is recom-
mended. Wear a protective hair cov-
ering to contain long hair.
12. alWays use safety glasses.
also use a face or dust mask if oper-
ation is dusty. everyday eyeglasses
only have impact resistant lenses,
they are not safety glasses.
13. Wear approved hearing
protection. air escaping from
pneumatic tools can exceed safe
exposure limits and may cause
hearing damage with prolonged
exposure.
14. secure WorK. use clamps or a
vise to hold work when practical. it is
safer than using your hand and frees
both hands to operate tool.
15. maintain tools With care.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
16. reduce
the
risK
of
unintentional firing. do not
carry tool with hand on trigger and
always disconnect from air when not
in use.
17. disconnect tools before ser-
vicing, changing accessories, or
moving to another location.
18. do not overreach. Keep
proper footing/balance at all times.
19. use
the
recommended
accessories. Consult owner’s
manual for recommended acces-
sories. the use of improper acces-
sories may cause risk of injury.
20. checK for damaged parts
before using. Check for bind-
ing and alignment of parts, broken
parts, part mounting, loose bolts,
and any other conditions that may-
affect machine operation. repair or
replace damaged parts.
21. never leave unattended
tool connected to air.
disconnect the air hose and do not
leave tool until it is relieved of any
built up pressure.
22. never alloW untrained
users to use this tool
While unsupervised.
23. if you are unsure of the
intended operation, stop
using tool. Seek formal training
or research books or magazines
that specialize in pneumatic tools.
24. be aWare of hose location
When
using
pneumatic
tools. hoses can easily become
a tripping hazard when laid across
the floor or spread out in a disorga-
nized fashion.
safety instructions for pneumatic tools
