GB
72
- Whenever you leave the ma-
chine,
- Before cleaning the ejection
hole or removing blockages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
• Do not place feet or hands near
or under rotating parts. Do not
stand in front of the grass ejec-
tion hole during sickle mowing.
Maintenance and Storage:
When servicing the blades,
remember that they can
move even if the power
source is off.
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Check the mower for any dam-
ages.
• Repair damaged parts as ap-
propriate.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid
fingers being trapped between
the rotating blades and fixed
parts of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
Electrical Safety:
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connect the equipment to a
socked with a RCD (Residual
Current Device) with a release
current of more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal fenc-
es, metal posts).
• Use only authorised power
cables of type H07RN-F,
which are no more than 75 m
long and suitable for outdoor
use. The power cable wire
cross section must be at least
2.5 mm
2
. Always completely
unroll cable drums before use.
Check the cable for damage.
Содержание ERM 1846 GT
