Grixx GROEXTBPB03, Руководство пользователя

Страница: 5 / 10

Grixx User Guide
5
Operation
On/Off
By briefly pressing the power button, the powerbank and LED torch will be activated. Press again and
the LED torch will be deactivated. If no device is connected, the powerbank changes automatically
into standby mode after a time interval of approx. 30 seconds.
Charging the powerbank
•
Connect the supplied micro USB cable with the micro USB port (INPUT) of the powerbank and
connect the other end of the USB cable with a standard USB port of a computer or USB power
supply.
•
The charging process and the current charge status is signaled via the LED status light, it will flash
blue. When the powerbank is fully charged, the LED status light is permanently on.
The required charging time of the powerbank is dependent on the selected charging source and its
output (max. 5V / 1A).
You can also use your own USB charging cable with micro USB connector to charge your powerbank.
Note: recharge the powerbank once every 3 months, as maintenance of the battery.
Charging devices with the powerbank
Connect the included USB cable to the USB port on the powerbank and the other end of the USB
cable to the micro USB port of the device to be charged. Charging will start automatically.
•
Of course, you can also use your own USB charging cable to
connect the powerbank with your device. Please note,
however, that devices can be charged only through the micro
USB port of the powerbank.
•
Please note that while charging a device with a powerbank,
about 30% of the total capacity is used up just through the
charging process. This because of, amongst others, the loss of
power from circuit warmth and voltage conversion.
•
The powerbank has to be used regularly for optimum
performance. If this is not the case, charge the powerbank fully
at least every three months.
•
Make sure that the warmth created through the charging process can be emitted from the
device (ideally place the powerbank on a firm and heat-resistant base while in use).