Griven VESUVIO OS CYM 250 HFT, Руководство пользователя

Страница: 14 / 20

4.0 USE OF THE PROJECTOR
The function of the dip-switches will change according to the selected mode, which can be
DMX/Slave mode or Master/Automatic mode.
The LED red light on indicates that the reception of the DMX signal is correct or that the
MASTER mode is activated. If the red light flashes, it means that there is no signal or that the
DMX signal is not correct.
4.1 DMX/SLAVE mode
To access the DMX/SLAVE mode, the dip-switch of the VESUVIO unit must be set to OFF (group
1-6, dip-switch no.2).
Every single VESUVIO unit must have its relevant address correctly set. The dip-switches which
set the projector address are those from no.1 to no.9.
Each VESUVIO uses 3 channels.
Group 1-6 dip-switches:
Dip-switch no.2: it selects the operating mode (OFF=DMX/SLAVE; ON=MASTER/AUTOMA-
TIC);
Dip-switch no.5: if it is set to the ON position during the DMX/SLAVE mode, 62 colours can be
obtained on the same channel.
14
table 1