Griven RB280, Инструкция по эксплуатации

Страница: 12 / 17

7.2 Fixed colour mode Dynamic white
7.3 Fixed colour mode monochrome by remote control
7.4 SLAVE configuration RGBW by remote control
To set up the unit as SLAVE set the 5 channels DMX mode with address 001.
7.5 SLAVE configuration Dynamic white by remote control
To set up the unit as SLAVE set the 3 channels DMX mode with address 001.
7.6 SLAVE configuration monochromatic by remote control
To set up the unit as SLAVE set the unit with dmx address 001.
An internal temperature sensor prevents the unit from overheating. The temperature sensor will limit the current
to leds, protecting their integrity, if the ambient temperature exceeds the one allowed.
The POLAR Edition of the projector is fitted with a thermal glass which is particularly useful for outdoor applications.
In fact, by warming up the glass melts ice and snow which might interfere with the projection.
When the projector is on, if required by the weather conditions, the glass is automatically warmed up.
If the projection is to be started at a definite time, take care to defrost the glass in advance so that the leds can
be lit at the time required.
With very cold temperatures (below -20° C), we recommend you to let the projector always powered and switch
on the LEDs when needed.
Function Keys Description
Fixed
colours
mode input
The preset colours mode is activated or deactivated by the (TV) key.
Colour se-
lection
4 / 5
Select the colour whose intensity is intended to be adjusted by the keys 4 or 5
(4=cold white; 5=warm white).
Colour
intensity
+ -
The intensity of the selected colour, with a 10% increase or decrease, is adjusted
by the VOL+ and VOL- keys.
Function Keys Description
Fixed
colours
mode input
The preset colours mode is activated or deactivated by the (TV) key.
Colour
intensity
+ -
The intensity of the white colour is adjusted by the VOL+ and VOL- keys by
256 steps.
8.0 Thermal protection
9.0 No frost glass
English 27