Griven microDUNE AL1830, Инструкция по эксплуатации

Страница: 15 / 20

4.2 Fitting the framework
1. Untighten the screws "A" and remove the flange "B" .
2. Open the unit by untightening the screws "C" and
remove the flange "D" and the glass "E" .
3. Fit the unit to the framework by using the two auto-threading screws "F" which you will find
attached to this manual. The screws must be inserted into the two holes "G" .
4. Close the unit by paying attention to the fact that the symbol "H" must match the very same
symbol to the flange "D" previously removed.
F
G
G
H
C
D
E
A
B
English 15