Griven KOLORSTREAM GR 0418, Руководство пользователя

Страница: 14 / 20

4.2 Options:
1= Master On/Off Master On -AUTOMATIC MODE
Master Off -DMX MODE
2= Preset Colours -Yellow, Cyan, Magenta, all in one channel.
3= Remote switch lamp On/Off -Lamp On/Off through the DMX controller.
4= Dimmer shutter, lamp On/Off Independent setting-To enter this option push SELECT after
you have set option 4 to ON (the display shows the current projector
addressing); to view the dimmer/Shutter adressing push SELECT and then
push (+) and (-) to view the new one and push ENTER to memorise it.
Note: The unit will have now two different addressing. Within 15 seconds the
projectors returns to the operating mode and the display shows the colours
addressing which is automatically updated to the new addressing.
9= Test
Lamp life: Push ENTER for more then 5 seconds
Use meter: Push ENTER for more then 20 seconds
To reset the lamp life meter push (-), (+) and ENTER simultaneously until you get the zero set-
ting of the display
4.3 DMX function
To access the unit through a DMX controller KOLORSTREAM must be set to MASTER
OFF.Push SELECT; when
1.ON is displayed push (+) or (-) to obtain 1.OF . Now press ENTER.
Theunit is set to MASTER OFF .
Note: when the KOLORSTREAM unit leaves the factory it is set to MASTER ON and
works in AUTOMATIC MODE (See AUTOMATIC MODE section).
Every single KOLORSTREAM unit must have its own display correctly set when it is controlled
by a digital signal. Please set the display of each unit as per diagram 1 when more units are
accessed through a DMX controller. KOLORSTREAM uses 6 channels.
DMX Addressing 6 Channels
Projector 1
0 0 1
Projector 2 0 0 7
Projector 3 0 1 3
Projector 4 0 1 9
Projector 5 0 2 5
Projector 6 0 3 1
Projector 7 0 3 7
Projector 8 0 4 3
Projector 9 0 4 9
Projector 10 0 5 5
(diag.1)
14