Griven KOLORCLIP GR 0440 CDM-SA/T 150W, Руководство пользователя

Страница: 14 / 20

3.5 DMX line connection
Remove the screw stoppers of the bushes shown in picture 12 by unscrewing the relevant nuts.
Open the PCB housing (as shown in picture 12) and connect the digital data cables as per scheme
depicted. It is highly recomended to slide cables through provided bushes and tighten the stud nuts
to guarantee the impermeability of the unit.
4.0 USE OF THE PROJECTOR
The selection of either DMX-SLAVE or MASTER-AUTOMATIC operating mode through its
dedicated key will change the function of the DMX addressing DIP switches.
Green led means the DMX signal is correctly received by the unit. It can also confirm the
MASTER option selection. Flashing green led means the DMX signal is either absent or not very
well received.
14
o
DATA -
GND
DATA +
pict.12