background image

12

3.6 DISPLAY AND CONTROL PANEL USE

The led colour indicates the projector mode.
The green led indicates the operating mode.
The red light indicates the setting or the zapping mode.
When the projector is in the operating mode the display indicates the projector DMX addressing
number, which is 001 when the unit leaves the factory. In order to change the DMX addressing
number push (SELECT) then (-) or (+). When you find the desired number push (ENTER). 
Push twice (SELECT) when you want to view or zap an option. To memorise it push (ENTER). If
options are not entered within 15 seconds the projector returns to the operating mode.

Options:

1= Master On/Off Master On -AUTOMATIC MODE

Master Off -DMX MODE

2= Preset Colours -Yellow, Cyan, Magenta, all in one channel.
3= Remote switch lamp On/Off -Lamp On/Off through the DMX controller.

DMX

4= Dimmer shutter, lamp On/Off Independent setting-To enter this option push SELECT after 

you have set option 4 to ON(the display shows the current projector ;
addressing); to view the dimmer/Shutter adressing push SELECT and then 
push (+) and (-) to view the new one and push ENTER to memorise it.
Note: The unit will have now two different addressing. Within 15 seconds the 
projectors returns to the operating mode and the display shows the colours
addressing which is automatically updated to the new addressing.

9= Test 

Lamp life: Push ENTER for more then 5 seconds
Use meter: Push ENTER for more then 20 seconds

To reset the lamp life meter push (-), (+) and ENTER simultaneously until you get the zero setting
of the display

G R EEN  LED  

 

R ED  LED  

Flashing red led -  

D M X SETTIN G

R ed led - O PTIO N S 

SETTIN G

G reen led - D M X 

SIG N AL 

Flashing green led -  

N O  D M X SIG N AL

-

Select

+

Enter

Flashing green led -
NO DMX SIGNAL

Green led - DMX
SIGNAL

Flashing red led -
DMX SETTING

Red led - OPTIONS
SETTING

Содержание KALEIDO GR 0410 MSD 575 W





















Отзывы: