Griven KALEIDO GR 0410 MSD 575 W, Инструкция по эксплуатации

Страница: 11 / 20

3.2 Mounting position
KALEIDO is fitted with a support
base which allows a steady position on
the floor or attached to a trussing
system.
The KALEIDO unit must not be
hung upside down
;
Both fixing yoke and support base
allow a complete movement of 180° to
help easy installation.
Minimum distance from flmmable
objects must be 0.5m so as to make air
circulation easy.
3.3 Mounting
4 11mm Ø holes (180x180 mm wheelbase) are provided in
the support base to fix the lantern to the ceiling or to the
floor. One 12,5 mm Ø hole screw nut is also available in
the middle of the support base and the yoke to hang or fix
the projector (see pict.1 and 2).
3.4 leaf barndoor set up
Take the glass safety grid off the unit by removing the 6 M4
screws and replace it with the 4 leaf barndoor set fixing it
again with the 6 screws. Further 4 holes have been provided
to fix the 4-leaf barndoor and the glass panel together to the
unit by 4 M3x10 screws.
3.5 Electrical connection
1) Cable the mains plug with a supply cable 3x1.5 mm
2
minimum and a 2-pin + GND plug;
2) Connect the lantern to a mains supply of 230V -
50/60Hz.
3) Ensure that the mains cable is connected to earth;
4) the line safety thermoswitch must have the following
characteristics:
rated for (In) 20A - sensitivity (Id) 0,03 A.
5) The unit is provided with power factor correction.
11
pict.1
pict.3
pict.2
NO
YES