8
1.0 PACKING
Check carefully the content of the box and in case of damage contact immediately your forwarder.
The following items are included in the box:
n° 1 instructions leaflet
n° 1 SKY ROSE MK2;
n° 1 2 poles Gewiss 16A socket;
n°2 Movable DMX plug/socket;
n° 4 standing supports
2.0 SAFETY
Even if this lantern is fitted with a safety micro-switch which automatically disconnects power as
soon as the lamp cover is opened, we strongly suggest to disconnect the lanterns from mains sup-
ply before replacing the lamp.
- This projector has been designed for use in outside environments. For safety operation, max.
ambient temperature must not exceed 35°C.
- Caution: the surface temperature of the projector can reach 95°C
- Caution: hot lamp; ensure that the lamp is cold before attempting to remove it (about 20 minutes)
3.0 INSTALLATION
3.1 Removing the fixing plates
Remove the front and the rear panels used to hold the
upper part of the lantern during transport.
3.2 Fitting lamp
1) Remove the 3 lamp covers located on the upper and side part of the lantern.
2) Clean the lamp with the cleaning towel and fit it carefully in the lamp holder.
- avoid to touch the lamp with fingers or dirty towels;
- do not shake the lamp;
3) Fix the lamp to the lamp holder tightening the fixing knobs.
4) Close the lamp covers.
3.3 Mounting position
Position the SKY ROSE MK2 on a flat surface, mount it on the wheels or fit it on brackets for per-
manent fixing.
