English
23
6.5 DMX functions monochrome
Emerald
can operate without DMX signal (in AUTOMATIC mode) and can be set so that a single MASTER unit will
command a series of SLAVE units. This function is particularly useful when more units are desired to execute the
same programme in synchrony.
The following picture shows an example of a Master-Slave layout.
7.1 AUTOMATIC configuration DW
The AUTOMATIC mode ONLY works when set to operate with 3 DMX channels.
Follow this description to modify the DMX channels setting: press the “MENU” button, select “CHN” and press
“ENTER” button to activate the function. Then select 3C through the “UP” and “DOWN” keys. Press “ENTER” to
confirm.
To activate the AUTOMATIC mode, press the “MENU” button up to visualize “ADR”. Through the “UP” and “DOWN”
keys select “AUT”. Press “ENTER” to confirm.
Through the “UP” and “DOWN” keys select “ACT”. Through the “UP” and “DOWN” keys select “ON” or “OFF” to
activate or deactivate the AUTOMATIC mode. Press “ENTER” to confirm.
The projector will perform a pre-set colour changing program, alternating warm white, neutral white and cold
white.
Now the unit is in AUTOMATIC mode and the diplay will keep reading “AUT”.
To exit from the AUTOMATIC mode, press the “MENU” button, select “ACT” and press “ENTER” to confirm.
Select “OFF” to deactivate the AUTOMATIC mode. Press ENTER to confirm.
Attention!
In absence of DMX signal the led will remain ON.
Channel Function
Value
Description
1
Dimmer
Strobe
0-15
Luminous output intensity 100%
16-150
Proportional control of the luminous output intensity 100-0%
151-160
Luminous output intensity 0%
161-255
Proportional control of the strobe effect 0-100% (255=max)
7.0 Master-Slave and Automatic function - RGBW - DW
MASTER
SLAVE 1
SLAVE N
IN
OUT
IN
OUT
SLAVE 2
IN
OUT
OUT
Terminal
(R=120
ƺ
not
included!)
