4.0 USE OF THE PROJECTOR
The function of the dip-switches will change according to the selected mode
(DMX-SLAVE/ MASTER-AUTOMATIC).
Once the unit is connected to the mains, the LED red light on the circuit board indi-
cates that the digital data is correctly received or that the MASTER mode is activa-
ted. If the LED red light is off, it means that the DMX signal is either absent or not cor-
rectly received.
4.1 MASTER/AUTOMATIC mode
To operate the unit in MASTER/AUTOMATIC mode, you must set the relevant
dip-switch to ON.
Pre-set programs included in the software of the unit can be accessed by adjusting
the DIP-SWITCHES set accordingly (refer to folowing table).
Programme N° Effect
Programme 1
Red - Magenta - Yellow
Programme 2
Red - Magenta - Yellow - White
Programme 3
Green - Cyan - Yellow
Programme 4
Green - Cyan - Yellow - White
Programme 5
Blue - Cyan - Magenta
Programme 6
Blue - Cyan - Magenta - White
Programme 7
All colours
Programme 8
All c White
11
