Dune MC MK3
User Manual
Griven S.r.l.
- Via Bulgaria, 16
46042 Castel Goffredo
Mantova - Italy
© Copyright Griven 2017 - Griven reserves the right to make
changes to this product and related instructions at any time
without prior notice and such changes shall be effective
immediatly
.
Tel. +39.0376.779483
E-mail: [email protected]
Web:
www.griven.com
AL5004
Rev. 2.00
Date: 19/10/2022
Typical system diagram:
OUT
IN
OUT
IN
OUT
IN
Line terminator
120Ω
(not included)
SLAVE 1
eg: CH001
SLAVE n#
eg: CH001
MASTER
eg: CH001
WARNING ! in this mode, no other DMX control device must be present along the line.
ATTENZIONE ! in questa modalità non devono essere presenti altri controller DMX sulla linea.
MASTER-SLAVE - AUTOMATIC mode
SLAVE 2
eg: CH001
OUT
IN
DMX cable
OUT
IN
DMX cable
OUT
IN
DMX cable
Line terminator
120Ω
(not included)
SLAVE 1
eg: CH005
SLAVE n#
eg: CHxxx
MASTER
eg: CH001
DMX mode
SLAVE 2
eg: CH009
DMX
controller
IN
DMX cable
WARNING ! Use a DMX repeater on each 32nd fi xture of the chain or in case the cable lenght exceeds 300m (
1000 ft.). Install a data terminator ( 120Ω) between Data+ and Data- on the DMX out cable of the last unit.
ATTENZIONE ! Utilizzare un ripetitore di segnale DMX ogni 32° proiettore della catena o nel caso la lunghezza del
cavo superi 300 m ( 1000 ft.). Installare un terminatore di linea ( 120 Ω ) tra i poli Data+ e Data- sul cavo dell’ulti-
mo proiettore.
For further details consult the confi guration schemes available on our website.
