4.0 USE OF THE PROJECTOR
The function of the dip-switches will change according to the selected mode (DMX-SLAVE/
MASTER-AUTOMATIC).
Once the unit is connected to the mains, the LED red light on the circuit board indicates that the
digital data is correctly received or that the MASTER mode is activated. If the LED red light is
off, it means that the DMX signal is either absent or not correctly received.
4.1 MASTER/AUTOMATIC mode
To operate the unit in MASTER/AUTOMATIC mode, you must set the relevant dip-switch to ON.
Pre-set programs included in the software of the unit can be accessed by adjusting the DIP-SWIT-
CHES set accordingly (refer to table 1).
The function COLOR SCENE LENGTH allows
you to select the duration of each color scene
according to the time frames shown in table 2:
11
Tabella 1
9
Tabella 2
