Graphite 300
can operate without DMX signal (in AUTOMATIC mode) and can be set so that a single MASTER unit
will command a series of SLAVE units. This function is particularly useful when more units are desired to execute the
same programme in synchrony.
The following picture shows an example of a Master-Slave layout.
9.1 MASTER configuration
Graphite 300
has to be set to MASTER ON to access it in automatic mode: push
MENU
, when
1.OF
is displayed push
UP
or
DOWN
to obtain
1.ON
Now press
ENTER
. The unit is set to MASTER ON. The unit starts working in automatic mode and is ready
for the programming procedure. Push
MENU
and the following will be displayed:
Select the desired programme by pushing keys
UP
or
DOWN
; 8 programmes are available as per table 1.
If instead one single colour is desired to be selected, by pushing the key
DOWN
after programme 8, or by
pushing the key
UP
before programme 1, the display will show respectively
C.00
or
C.60
.
Push keys
UP
or
DOWN
to select one of the 60 colours available.
To confirm the choice, push
MENU
until
1.ON
is visualized.
Colour changing speed can be adjusted by pushing
MENU
; the display will show:
SP.1
Push
UP
or
DOWN
to set the speed. Colour scene and positioning length are described in diagram 2.
To confirm the choice, push
MENU
until
1.ON
is visualized.
Colour scene length can be adjusted by pushing
MENU
and the display will show:
PA.0
Act on
UP
or
DOWN
to set the colour scene length. Pre-set colour scene length can be checked in dia-
gram 3.
To confirm the choice, push
MENU
until
1.ON
is visualized.
To see the automatic colour scenes sequence while it is automatically revolving push
MENU
repeatedly.
Push
MENU
, then
UP
or
DOWN
, as above mentioned, to select a new programme.
P A. 0
S P. 1
C. 0 1
P. 0 1
Warning!
If MASTER-SLAVE mode is being used, no other DMX control device must be present along the line!!
MASTER
SLAVE 1
SLAVE N
IN
OUT
IN
OUT
SLAVE 2
IN
OUT
Terminal resistor
(R=120 W not included!)
ADDRESS =
001
OPTION 1 = OFF
OPTION 2 = OFF
OPTION 3 = OFF
OPTION 4 = OFF
ADDRESS = 001
OPTION 1 = OFF
OPTION 2 = OFF
OPTION 3 = OFF
OPTION 4 = OFF
ADDRESS = 001
OPTION 1 = ON
OPTION 2 = OFF
OPTION 3 = OFF
OPTION 4 = OFF
9.0 Master-Slave and Automatic function
