GRIT GRITJunior, Руководство по сборке и инструкция пользователя

Страница: 18 / 54

3.4 Adjusting the Seatback
The GRIT Junior seatback can be adjusted both forward-backward and left-right. To make
these adjustments, use a 5mm Allen key to loosen the four bolts at the rear of the seatback (see
below), then slide the seatback forward, backward, left, or right, as desired. Then, retighten
those four bolts.
a) Start on one side of the seatback. Locate the two bolts
at the rear of the seatback clamp, stacked vertically.
b) Loosen the two bolts with your 4mm Allen key. Repeat
on the other side of the seatback. Slide the seatback along the
seatback channels to your desired position. Tighten the
bolts.
If the Seatback Becomes Stuck
Sometimes, the seatback can be hard to insert or remove. This happens when the seatback
tubes are not pushed into the seat simultaneously, if the canes on the seatback are bent, or if
the receiving sockets are misaligned or bent.
To release a jammed seatback: Tap one side of the seatback with the base of your hand
upward or downward. If this is a continuing issue, please contact GRIT at support@gogrit.us
and we will assist.
If your seatback doesn’t insert or align with the receiving sockets : Check for damage to
the top of the seatpan, the canes, and the receiving sockets themselves. Call GRIT at
617-356-8106 or email support@gogrit.us immediately.
17