Hole A
Hole B
Slot A
Holes C
Align
When correctly fitted these
two faces will be parallel
Step 4.
Fit 'Front Carrier Mount'
Align slot 'A' with hole 'A' & insert 10mm x 110 mm bolt with washer.
•
Align hole 'B' with one of the three holes 'C', to set the angle of the 'Front Carrier
•
Mount' (this has to match the position you chose at step 2, refer to diagram at
bottom page and
ensure faces are parallel
.)
Insert 10mm x 110mm bolt with washer.
•
Fit washer and nuts &
tighten firmly
.
•
page 3
NOTE.
If you adjust the
angle of the 'Main Arm' you
must also adjust the angle
of the 'Front Carrier Mount'
to suit.
Align