Grindmaster GnB 10H, Руководство оператора

Страница: 5 / 28

Grind’n Brew Grindmaster ® 5
Operating the Touchpad (Refer to Figure C)
1. To select the appropriate bean hopper, press the
hopper (left) button until the desired indicator
arrow is illuminated.
NOTE: This step only applies to dual bean hoppers.
2. To select a portion size, press the center of the
Portion Size (middle) button until the half pot or
full pot symbol (depending on your need) is
illuminated.
3. The Mode (right) button allows you to select either
the “Brew Only”, “Grind Only”, or “Grind and
Brew” feature.
a) To grind only, press the center of the Mode
(right) button until the grinder symbol is
illuminated.
b) To brew only, press the center of the Mode
(right) button until the coffee cup symbol is
illuminated.
c)
To grind and brew, press the Mode (right)
button until both symbols are illuminated together.
Important: Brewers are factory set for throw weight
and water portion. Please check that installation is
correct before making adjustment. No adjustments
should be necessary for normal installation.
Brewing
Important:
Brewers are factory set for the correct
grind and brew times for average situations. You should
not need to make adjustments in the field.
1. Make sure that a new paper filter is in the brew
basket and the brew basket is in place in the
brewer.
2. Place beans in the hopper.
3. Choose to “Grind and Brew”. Press the far right
touchpad so “Grind and Brew” lights are lit.
4. Choose the Portion Size. Press the middle touchpad
until desired volume is lit.
5. Choose Decaf or Regular coffee (only applicable to
dual bean Grind’n Brews). Press left touchpad.
Arrow will either point left or right for Decaf or
Regular.
6. Place a decanter or airpot under the brew basket,
depending on the model.
7. Press Start and the brewing cycle will begin.
8. You will see the coffee bean level go down slightly.
You will hear the coffee grind. Coffee is
automatically ground, portioned and placed in
brew basket. Then ground coffee is automatically
brewed. The Ready light will now blink, indicating
that grinding and brewing are in progress. This will
take 3-4 minutes for a 1/2 gal. (1.9 L) pot. Portions
are factory set. A stop function is added to the start
switch. When this switch is depressed, it allows the
unit to stop during the selected grind, brew, or
grind and brew functions.
After brewing a pot, the tank must reheat. Reheat time
is 5 1/2 - 8 minutes for 120V brewers. Remember that
the brewer function is disabled until the Ready light is
on, indicating that the water is hot enough to brew. A
flashing green light indicates that the brewer is
reheating or that there is a cycle in progress. Do not
remove the brew basket while the light is flashing.
The
brew basket must be removed before a new brew
can be initiated.
This feature ensures that the
operator discards the old coffee grounds and installs a
new coffee filter.
Operation
(Single Bean Model)
(Dual Bean Model)
Half or Full Pot
Bean Selector
(Dual Bean
Models Only)
Grind only
Brew only
Grind and Brew Option
Figure C
Half or Full Pot
Grind only
Brew only
Grind and Brew Option