Grindlux 4000 Скачать руководство пользователя

Страница: 11 / 16

English –

WARNING!
Wear protective glasses while
grinding!

Fitting the Bandsaw Blade

Fit the bandsaw blade on the one-man sawmill
according to the instructions in the operator´s
manual for the one-man sawmill.

Changing the Grinding Disc

WARNING!
Before changing the grinding
disc, disconnect the power
supply to the grinder!

WARNING!
Check that the grinding disc
shows no signs of cracking and
that it is secured to the spindle.
Stop the grinding disc immedi-
ately if abnormal vibrations
occur.

MAINTENANCE

1. Fit the stop pin (Q).

2. Start the grinding disc and feed using the

power switches (49 and 50).

3. When the grinder stops automatically,

remove the stop pin.

4. Fold up the grinding motor and remove the

bandsaw blade.

1. Fold up the top section of the grinder.

2. Hold the grinding disc and loosen the nut (R)

using a pair of pliers.

3. Remove the old grinding disc and fit the new

disc. Tighten the nut (R) lightly using a pair of
pliers.

FIG. 89

FIG. 90

Содержание 4000

















Результаты поиска

Содержание 4000

Отзывы:

Похожие инструкции для 4000

Бренды по названию

Популярные бренды

Grindlux 4000, Руководство оператора

Результаты поиска

Содержание 4000

Отзывы:

Похожие инструкции для 4000

Бренды по названию

Популярные бренды