Grindex MASTER H Скачать руководство пользователя страница 3

3

Installation, care and maintenance 

MASTER

Safety symbols

Following symbols are used in 
this manual:

For electrical related warnings.

Safety precautions

For all other warnings.

WARNING!

Is used when there can be a 
risk to cause severe injury to 
people, death or considerable 
damage to property.

CAUTION!

Is used when there will be or 
is a risk to cause smaller inju-
ry to people, or  smaller dam-
age to property.

NOTE!

Is used to pay intention to installation, use, 
operation or service information that is im-
portant but not involved with any risk.

This manual contains basic information on the 
installation, operting and maintenance and 
should be followed carefully. It is essential that 
these instructions are carefully read before 
installation or commisioning by both the 
installation crew as well as those responsible 
for operation or maintenance. The operating 
instructions should always be readily available at 
the location of the unit.

DANGER!

Is used when there will be a 
risk to cause severe injury to 
people, death or considerable 
damage to property.

Precautionary measures

In order to minimize the risk of accident in con­
nection with service work, the following rules 
should be followed:
1. Before starting work on the pump, make sure 

that the pump is isolated from the power sup­
ply and cannot be energized.

2. Bear in mind the risk of accidents. Make sure 

that the machine or parts of the machine can­
not roll or fall over and injure people or dam­
age property.

3. Make sure that the lifting equipment can han­

dle the weight you want to lift and that it is in 
good condition.

4. Don't work under suspended load.
5. Carry out the work on a sturdy workbench.
6. Bear in mind the danger of electrical acci­

dents.

7. Check that tools and other equipment are in 

good condition.

8. Bear in mind health hazards. Observe strict 

cleanliness. 

9. When carrying out repair work take care to 

avoid injury by cutting or pinching.

10.Make sure you have a irst-aid box near at 

hand.

Follow all other health and safety regulation, lo­
cal codes and ordinances.

Safety regulations for the 
owner/operator

All government regulations, local health and 
safety codes shall be complied with.
All dangers due to electricity must be avoided 
(for details consult the regulations of your local 
electricity supply company).

Unilateral modiication and 

spare parts manufacturing

Modiications or changes to the unit/installation 

should only be carried out after consulting with 
Grindex. 
Original spare parts and accessories authorized 
by the manufacturer are essential for compli­
ance. The use of other parts can invalidate any 
claims for warranty or compensation.

Recycling

Local and/or private laws and regulations regarding 
recycling must be followed. If there are no laws or 
regulations, or the product is not accepted by an aut-
horized recycling company, the product or it’s parts can 
be returned to the nearest Grindex sales company or 
service workshop.

 

Содержание MASTER H

























Отзывы: