CRYO
Therm
#4500 User’s Manual
Page 9
090205.1.12.16
Care & Maintenance (continued):
Weekly Cleaning Procedure
1.
Move all switches on the control panel to the “off” position.
2. Open the drain valve(s) to drain the tanks.
3. When tanks are empty remove the filter cartridge(s). See the
Changing the Filter Cartridge
section of this
manual for further instructions.
4. Remove any debris from around the pump suctions, drain covers, filter housing, and hydrotherapy jets.
5. Use
pure disinfectant spray
(or comparable product) to clean all exposed surfaces of the tank, the Corian
exterior, and the inside of the filter housing. Allow disinfectant to stand on the surfaces for at least 30
seconds before wiping.
Note: longer contact times may be required for certain pathogens, refer to product label for specific
instructions.
6. Examine tank walls, exterior surfaces, and associated components for damage and visual cleanliness.
Remove any stains using the techniques described in the
Care and Maintenance
section of this manual.
Report any damage to your Grimm representative.
7. Install a clean filter cartridge(s), refer to the
Changing the Filter Cartridge
section of this manual
8. Close drain valves.
9. Fill tanks according to procedure described in the
Set Up and Operation
section of this manual.
10. Refer to the
Water Balance
section of this manual for information and advice about keeping water clean and
sanitized.
