CRYO
Therm
#4500 User’s Manual
Page 7
090205.1.12.16
Operation (continued):
During contrast treatments it is advisable to turn the fill switches of the tank off so that displaced water is not
immediately replaced which allows maintenance of more stable temperature for the duration of the treatment. Be sure
to turn fill switch back on after treatment is completed.
Important Note:
Water level controls prevent overflow during filling and operation of CRYOTherm, however, patient loading can result
in overflow of the tank if entry into the tank is too rapid. Athletes should be instructed to enter the tank slowly,
allowing the overflow drain to accommodate the displaced water and prevent overflow of water onto the floor and
electrical components.
When exiting CRYOTherm via the compartment steps, care should be taken not to splash excessive water onto the
surface of the steps or around the control panel. The clear plastic cover should remain in place whenever
CRYOTherm is in use, to avoid splashing of the controls and accidental moving of the switches.
Tripping of the GFCI breaker is possible if a CRYOTherm tank is overflowed, or excessive water is splashed in the
area of electrical components. If this occurs the area should be allowed to dry out, and the breaker reset to restore
normal operation.
