Grimm Audio CC1 страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 28

background image

25

8. Grimm Audio Limited Warranty

Grimm Audio CV (“Grimm Audio”) warrants this product to be free of defects in ma-
terial and workmanship for a period of one (1) year for parts and for a period of one
(1) year for labor from the date of original purchase. This warranty is enforcable
only by the original retail purchaser and cannot be transferred or assigned.

During the warranty period Grimm Audio shall, at its sole and absolute option,
either repair or replace free of charge any product that proves to be defective on
inspection by Grimm Audio or its authorized service representative. In all cases
disputes concerning this warranty shall be resolved as prescribed by law. To obtain
warranty service, the purchaser must first call or write Grimm Audio at the address
and telephone number printed below to obtain instructions where to send the unit
for service. All enquiries must be accompanied by a description of the problem. All
authorized returns must be sent to Grimm Audio or an authorized Grimm Audio
repair facility postage prepaid, insured and properly packaged. Proof of purchase
must be presented in the form of a bill of sale or some other positive proof that the
product is within the warranty period. Grimm Audio reserves the right to update
any unit returned for repair. Grimm Audio reserves the right to change or improve
design of the product at any time without prior notice.

This warranty does not cover claims for damage due to abuse, neglect, alteration or
attempted repair by unauthorized personnel, and is limited to failures arising dur-
ing normal use that are due to defects in material or workmanship in the product.

In no event will Grimm Audio be liable for incidental, consequential, indirect or
other damages resulting from the breach of any express or implied warranty, in-
cluding, among other things, damage to property, damage based on inconvenience
or on loss of use of the product, and, to the extent permitted by law, damages for
personal injury.

© 2011, Grimm Audio CV. All rights reserved
Reproduction in whole or in part is prohibited.
Specifications subject to change without notice.

Grimm Audio CC1 manual v1.1, 11/14/11

«
...
23
24
25
26
27
...
»

Содержание CC1





























Отзывы:

Нет отзывов

Похожие инструкции для CC1

Бренд: Samsung Страницы: 2

Бренд: Hettich Страницы: 40

Бренд: Kogan Страницы: 8

MOELLER Xcomfort CSEZ-01/14

Бренд: F&G Страницы: 2

Бренд: Daewoo Страницы: 38

Бренд: UbiTech Страницы: 9

Бренд: FEB Страницы: 3

Бренд: nodon Страницы: 8

Бренд: Inovelli Страницы: 3

Бренд: GILBARCO VEEDER-ROOT Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды