TABLE OF CONTENTS
PAGE NUMBER
GENERAL
SAFETY I
NFORMATION
3
GENERAL INSTALLATION INFORMATION
4
Connection Load
4
GENERAL OPERATING INSTRUCTIONS
Bun Box
5
Infinite Controls
5
Electronic Controls
6
Cleaning
7
WARRANTY
Outside the United States
8
United States
9
WIRING DIAGRAM
8
EXPLODED VIEW
10 - 11
PARTS LIST
50 MODEL SERIES
12 - 13
GENERAL SAFETY INFORMATION
This equipment is designed and sold for commercial use only by personnel trained and experienced in
its operation and is not sold for consumer use in and around the home nor for use directly by the general
public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with the
unit prior to putting it into operation. Make sure all people associated with its use understand the units
operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This unit has
been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is
received in damaged condition, either apparent or concealed, a claim must be made with the delivering
carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request
for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all
contents plus external and internal packaging materials for inspection. The carrier will make an inspection
and will supply necessary claim forms.
GENERAL INSTALLATION INFORMATION
The grill should be connected to a wall type receptacle, a direct line or
individual branch circuit. An individual branch circuit is preferred. If
connected to an overloaded circuit the grill will not operate properly.
The unit should be level when installed. Models equipped with bun
boxes must be level to utilize the self-closing feature of the bun drawer.
Adjustable 4-inch legs are standard on the 75 series and available for
all other models.
This grill is equipped for the voltage shown on the nameplate. It will
operate on alternating current only, however, the specified voltage must
be applied.
DO NOT CONNECT TO DIRECT CURRENT (DC).
IMPORTANT
UNLEVEL UNITS COULD RESULT IN HAVING PRODUCT TRAVEL FROM ONE SIDE
TO THE NEXT, OVER A PERIOD OF TIME.
3
CAUTION
WARNING
CONNECTION LOAD
Infinite Control
Model Series
Wattage
30SCHDM
1380
45SCHDEP
1650
50SCHDEM
1565
50SCHDEP
1565
50SCHDM
1885
75SCHDEM-208/240
1920/2500
75SCHDM-208/240
1920/2500
