GG-W
S-01
UK
Connection of the stove and the refill.
1. Close the control valve.
2. Fix manually the refill on the stove nozzle until the connection is well gripped.
3. The type of the containers is 13kg of butane/propane gas, and it should be in a Ventilation space.
4. The regulator must comply with the requirements of EN 12684 :2001, with a security valve.
5. The hose used must conform to the relevant standard for the country of use, and the length cannot
exceed 1.50m. Worn or damaged hose must be replaced.
6. The gas supply hose should be checked periodically and should be replaced damaged and at least every
two years.
WARNING
—
Never grip the refill on the stove too strong. By gripping the refill too strong, you
may damage the stove or cause the leak of the refill combustible.
—
The combustible leak may cause fire, burn, serious injuries or death.
—
Be highly careful when you use this stove under 0°. When the temperature is under
0°, the toric joints may harden and the combustible can leak.
—
Make always sure that the combustible does not leak before and after the stove ignition.
—
The use of a stove leaking may cause fire, burn, serious injuries or death.
—
Keep the children away from the stove and the combustible - Black Pearl recommends a distance higher than 3 meters.
—
Never let a hot or turned-on stove unwatched.
—
When install the flexible tube, it should far away from the hot and sharp objects.
—
When changing the flexible tube, it is necessary to according to the local law.
1) INSTRUCTIONS ABOUT THE USE OF THE STOVE
1. Take out the combustible material and flammable liquids or vapour from the cooking area.
2.Put the stove on a solid, stable and plane surface to ensure the stability of the stove.
3. Totally open the pan supports.
4. The flexible tube should far away from the hot and sharp objects to ensure that it is not subjected to twisting.
5. The container compartment should be in the ventilation openings.
6. When changing the gas cylinder, it shall be carried out away from any source of ignition.
7. In order to protect the surface, the support temperature cannot exceed 50k.
