background image

3

Never

connect an unregulated LP gas tank to

your gas grill. The gas Regulator assembly

supplied with your gas grill is adjusted to have

an outlet pressure of 11" water column (W.C.)

for connection to an LP gas tank.

Only use the Regulator and Hose Assembly
supplied with your gas grill. Replacement

Regulators and Hose Assemblies must be

those specified by manufacturer.

Have your LP gas tank filled by a reputable propane

g a s

d e a l e r

a n d

v i s u a l l y

i n s p e c t e d

a n d

re-qualified at each filling.

Never fill the gas tank beyond 80% full.
Have your propane gas dealer check the release

valve after every filling to ensure that it remains

free of defects.

Always keep LP gas tanks in upright position.

Do not store (or use) gasoline or other  flammable

vapors and liquids in the vicinity of this gas grill.

An LP gas tank that is not connected for use must
NOT be stored on bottom shelf inside cabinet or in
t he v ic ini ty o f th i s or a n y ot her gas g ri ll .

Do not subject the LP gas tank to excessive heat.

Never store an LP gas tank indoors. If you

store your gas grill in the garage or other indoor

location,

always

disconnect the LP gas tank

first, store it safely outside.

LP gas tanks must be stored outdoors in a
well-ventilated area and out of the reach of

children. Disconnected LP gas tanks must not

be stored in a building, garage or any other

enclosed area.

W hen your gas grill is not in use the gas
must be turned off at the LP gas tank.

Proper Placement and Clearance of Grill
Never

use your gas grill in a garage, porch, shed,

breezeway or any other enclosed area. Your gas grill is to
be used

outdoors only

, at least 36 inches from the back

and side of any combustible surface. Your gas grill
should not be placed under any surface that will burn.
Do not obstruct the flow  of ventilation air around the
gas grill housing.

This outdoor gas grill is not intended to be installed in
or on recreational vehicles and/or boats.

The LP gas tank has a Shut Off Valve, terminating
in an LP gas supply tank valve outlet, that is
compatible with a Type 1 tank connection device.
The LP gas tank must also have a safety relief
device that has a direct communication with the
vapor space of the tank.

The tank supply system must be arranged for
vapor withdrawal.
The LP gas tank used must have a collar
to protect the tank valve.

1.

2.

3.

The Regulator and Hose assembly must be
inspected before each use of the grill. If there

is excessive abrasion or wear or if the hose

is cut, it must be replaced prior to the grill

being used again.

Keep the gas Regulator Hose away from hot

grill surfaces and dripping grease. Av oid
unnecessary twisting of hose. Visually inspect

hose prior to each use f or cuts, crack s,

excessive wear or other damage. If the Hose

appears damaged do not use the gas grill, call
our Customer Service Dept. for a replacement,

at 1-800-667-7313.

Never

light your gas grill with the Lid closed

or before checking to insure the Burner Tubes
are fully seated over the Gas Valve Orifices.

Never

allow children to operate your grill. Do

not allow children to play near your grill.

Failure to comply with these instructions
could result in a fire or explosion that could
cause serious bodily injury, death, or prop-
erty damage.

WARNING

A strong gas smell, or the hissing sound of gas
indicates a serious problem with your gas grill
or the LP gas tank. Failure to immediately follow
the steps listed below could result in a fire or
explosion that could cause serious bodily
injury, death, or property damage.

NOTE:

The normal flow of gas through the

Regulator and Hose Assembly can create a
humming sound. A low volume of sound is
perfectly normal and will not interfere with opera-
tion of the grill. If humming sound is loud and
excessive you may need to purge air from the
gas line or reset the Regulator excess gas flow
device. This purging procedure should be done
every time a new LP gas tank is connected to
your grill. For help

call the Grill Information

Center.

Customer Service Dept., 8:00am-5:00pm
EST, Monday through Friday at:
1-800-667-7313

Shut off gas supply to the gas grill.

Turn the Control Knobs to OFF position.

Put out any flame with a Class B fire
extinguisher.

Open Grill Lid.

Get away from the LP gas tank.

Do not try to fix the problem yourself.

If odor continues or you have a fire you cannot
extinguish, call your fire department. Do not call
near the LP gas tank because your telephone is
an electrical device and could create a spark

resulting in fire and/or explosion.

WARNING

!

!

Содержание SS72 LP





























Отзывы: