Grill Chef 12739A, Сборка и руководство по эксплуатации

Страница: 18 / 28

18
GRILLCHEF
Connecting and disconnecting the gas cylinder
Parts and tools needed
• 17 mm spanner (open-ended spanner SW 17)
• Gas cylinder
A common camping gas cylinder with a fill weight of 3, 5 or 11 kg (e.g. grey camping propane gas cylinder). These are
available at DIY shops or liquid gas suppliers.
• Pressure regulator
Preset and -approved pressure regulator, max. 1.5 kg/h, operating pressure 28-30 mbar at butane, 37 mbar at pro-
pane, suitable for the gas cylinder used. This type of pressure reducer is also available from your local dealer.
• Leak detector
You can locate any leaks in the gas system using a leak detector. This can be purchased at DIY shops or liquid gas sup-
pliers. Please follow the operating instructions of the leak detector.
The following part is included in delivery. It corresponds to the standards applicable in the country to which it has been
supplied by LANDMANN .
• Gas hose
-approved hose of sufficient length, allowing installation without any kinks.
Connecting the Gas Cylinder
Danger "Ignition of escaping gas"
Liquid gas is highly flammable and explosive.
Possible consequences:
• Serious personal injury or damage to property if escaping gas ignites in an environment
in which it is not controlled.
Safety precautions:
• When connecting the gas cylinder ensure that there are no sources of ignition within a
5 m radius.
• Take special care not to light any naked flames, do not smoke or switch on electric appli-
ances (devices, lights, door bells), etc. (sparkover possible).
• If necessary, replace the hose in order to comply with the corresponding national requi-
rements.
1. Select a suitable place to set up the cooker. Make sure that ...
– no flammable materials or substances are in close proximity to the cooker. Minimum distance to flammable mate-
rials or substances: 2m above and 1m to the side; distance to flame resistant materials or substances - min 0.25 m.
– the cooker is positioned firmly on a flat, sufficiently large surface area. It must not be moved during operation.