Grill Chef 12375FT, Руководство по сборке и эксплуатации

Страница: 18 / 28

18
GRILLCHEF
Connecting the Gas Cylinder
Danger "Ignition of escaping gas"
Liquid gas is highly flammable and explosive.
Possible consequences:
• Serious personal injury or damage to property if escaping gas ignites in an environment
in which it is not controlled.
Safety precautions:
• When connecting the gas cylinder ensure that there are no sources of ignition within a
5 m radius.
• Take special care not to light any naked flames, do not smoke or switch on electric appli-
ances (devices, lights, door bells), etc. (sparkover possible).
• If necessary, replace the hose in order to comply with the corresponding national re-
quirements.
1. Select a suitable place to set up the grill. Make sure that ...
– there are not, and will not be, any flammable materials or substances nearby. Minimum distance to flammable
materials or substances: 2m above and 1m to the side; distance to flame resistant materials or substances - min
0.25 m.
– the grill is positioned firmly on a flat, sufficiently large surface area. It must not be moved during operation.
G5
G1
3
G2
G4
1. Turn the operating lever (G2) to the 3 o'clock position
and then press the pressure reducer (G1) on the valve
of the gas bottle (G4) until you hear a click.
2. Check to make sure they are correctly connected by
pulling the pressure reducer (G1) upwards. It should
not disconnect from the bottle valve.
3. Check the connection between the pressure redu-
cer (G1) and the gas hose (G5) and the connection
between the gas hose (G5) and the setting device
(underneath the front panel (16)).
4. Open the cylinder valve (turn operating lever (G2) to a 6 o'clock position) and use a standard leak detector to make sure
that all of the connections are tight.
– Please observe the instructions for the leak detection agent! Never check for leaks using a naked flame. Listening
for leaks is not a reliable method of detection either.
– If the connection is not sealed properly close the bottle valve immediately (turn operating lever (G2) to a 3 o'clock
position) and then re-tighten the connection or replace the leaking part. Repeat the leak test.
5. If you do not wish to use the barbecue immediately, close the bottle valve (turn operating lever (G2) to a 3 o'clock
position).