Tipo Documento
Manuale PM
–
PMI
–
PIGMO - PIPMO
Anno
2016
Pagina
16 di 22
Nome File
Manuale PM
–
PMI
–
PIGMO - PIPMO
Revisione
0
For your safety, put the protective case as shown.
4.4 Electrical connections
Connection to the mains is done by simply inserting the plug. The corresponding wall
plug must correspond to what is set in the safety regulations.
It is obligatory to connect the machine to an earthed wall plug.
The plant must be fitted with an emergency safety cutout switch.
The simplicity of the connection must not make you under evaluate the importance of
respecting general security measures for electricity. Therefore it is important to:
control that the mains voltage is the same as that indicated on the engine plate
before using check the integrity of the electric cable and in case of damage it
must be replaced
avoid leaving the cable exposed to collisions, passage of people or vehicles or
any other situation that could be a threat to its integrity
protect the cable, plug-wall socket connection and any other electric parts from
humidity
In case the use of an extension cable is necessary, it is advisable to
use an electric 1.5 mm cable for lengths of up to 20 m and a 2.5 mm
cable for over 20m.
GB
