Tipo Documento
Manuale PM
–
PMI
–
PIGMO - PIPMO
Anno
2016
Pagina
14 di 22
Nome File
Manuale PM
–
PMI
–
PIGMO - PIPMO
Revisione
0
If the machine is positioned near to transit zones, you must place suitable
barriers around it for protection of accidental bumps with trolleys, trucks etc.
If it is located on intermediate floors, elevated floors or raised platforms, check
that the maximum carrying capacity is more than the overall weight of the
machine and any other accessories such as lifting equipment etc. always
considering an adequate safety factor.
4.2 Transport, unloading and installation
The machine is supplied already assembled into its operating configuration so the
risks due to movement concern the whole machine.
Transport must be by qualified transporters able to guarantee the correct movement
of the transported materials.
Grifo Macchine Enologiche does not accept any responsibility for
damages from transport. The goods are supplied ex-factory.
On receipt, control the integrity of the different parts of the machine and check that
the necessary parts for installation are not missing.
Check
that
the
consignment
corresponds
to
the
order
specifications.
Complaints relative to the goods must be made in writing, to GRIFO Macchine
Enalogiche S.n.c. within 15 days from receipt of delivery.
Pay maximum attention when moving the machine, respecting what
is set out in current regulations and in any safety procedures.
Any moving of the machine must be done by two adults holding the four support
tubes at its extremes.
GB
