Grieve WATLOW PM PID, Основное управление

Страница: 2 / 4

BASIC OPERATION
– PM PID
REV E
– 2/26/15
Page 2 of 4
Z:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\PM\BASIC OPERATION - PM PID rev E.doc
C. PROFILE OPERATION
***ONLY APPLICABLE IF CONTROLLER HAS PROFILE OPTION
1. From the HOME PAGE , press to start a profile. will light up to
indicate a profile is running.
2. Press to terminate a profile from the HOME PAGE .
D. CHANGE TEMPERATURE UNITS
***NOT REQUIRED FOR NORMAL OPERATION
1. From the HOME PAGE , press and hold and for 6 seconds to
enter the SETUP PAGE . Ai is shown on the upper display and SEt is
shown on the lower display.
2. Press until gLbL is shown in the upper display. Press to enter
gLbL menu.
3. Press until C_F is shown on the lower display.
4. Press or to change to the desired temperature unit.
5. Press and hold for 2 seconds to exit SETUP PAGE . The process
value, set point, upper and lower limits will automatically change according
to the temperature unit selected.
E. VIEW PERCENT OUTPUT
1. From the HOME PAGE , press once. The percent output is shown on
the upper display and h.Pr is shown on the lower display.
2. Press once to return to the HOME PAGE .