BASIC OPERATION
– PM PID
REV E
– 2/26/15
Page 1 of 4
Z:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\PM\BASIC OPERATION - PM PID rev E.doc
WATLOW PM PID KEYS (1/4 DIN SHOWN)
A.
BASIC OPERATION
1.
If you ever reach a point on the controller where you do not want to be,
press and hold
for 2 seconds to return to the
HOME PAGE
.
2.
From the
HOME PAGE
, press to scroll through the display
parameters.
B.
STATIC SET POINT OPERATION
1.
From the
HOME PAGE
, press
or to change the set point.
2.
To enable static set point operation after running a profile, perform the
following steps:
a.
From the
HOME PAGE
, press until
C.M
is shown on the lower
display and
oFF
is shown on the upper display.
b.
Press or until
AUto
is shown on the upper display.
c.
Press and hold to return to the
HOME PAGE.
EZ KEY(S)
(PROGRAMMABLE)
ADVANCE KEY
(ADVANCES THROUGH PROMPTS)
LOWER DISPLAY
(DISPLAYS SET POINT
DURING OPERATION OR
PARAMETER WHOSE
VALUE APPEARS IN UPPER
DISPLAY
UP AND DOWN ARROW KEYS
(MOVE UP/INCREASE AND
MOVE DOWN/DECREASE)
INDICATOR LIGHTS:
(DISPLAY TEMPERATURE
UNIT, OUTPUT, PROFILE AND
COM ACTIVITY)
UPPER DISPLAY
(DISPLAYS PROCESS VALUE
DURING OPERATION OR VALUE
OF PARAMETER SHOWN IN
LOWER DISPLAY.)
INFINITY KEY
(PRESS TO BACK UP
ONE LEVEL)
