LABO VEN S.IN S.7-18.wpd
6 of 23
07/18
2-5
MAINTENANCE AND INSPECTION
2-5.1
Regularly scheduled inspection and maintenance of all safety devices shall be
performed by user. Failure to do this may result not only in fire or explosion
damage, but also contribute to accidental shutdowns and loss of production.
See Section 7 -
A
Maintenance
@
and Appendix B -
A
Minimum Periodic
Maintenance Report
@
.
2-5.2
Regularly scheduled inspection of the oven interior, heat chamber and
ductwork shall be performed by user to determine need for cleaning and repair.
Failure to do this may result in internal fires or component failure resulting in
oven damage and loss of production.
2-5.3
t shall be the sole responsibility of the user to establish, schedule and enforce
the frequency of and the extent of the inspection/maintenance program (as well
as the corrective action to be taken) because only the user can know what the
actual operating conditions are. Contact your insurance authority, Factory
Mutual or the National Fire Protection Association, whose addresses are listed
in Appendix B, for more information on inspection/maintenance programs.
2-6
RETROACTIVITY
This equipment has been designed and manufactured in accordance with applicable
National Codes in effect as of the date of manufacture. It is the responsibility of the end
user to update equipment as necessary to comply with future code changes. If you are in
doubt, contact manufacturer to review your equipment design against current National
Codes.
