Version 01.18
15
Sliding bi-fold shutters
• Type 2 with inside overwinding protection
Select fastening material in accordance with the foundation
Install the overwinding protection in such a way that the guide carriage (1) is up against the rubber
buffer (2) in open position and the sash is at right angles to the wall.
• Step 1: Align the sash and define
the position of the scissor holder
Art. 1430062
• Step 2: Fasten the scissor holder
Art. 1430062 using the two blind
rivets (4x13) Art. 10050003
• Step 3: Place the slide bearing Art.
1430072 on top of the scissors
• Step 4: Secure using the locking
washer d1=7 Art. 1430070 in the
second ring groove
Blind rivet 4x13
Polygrip Art. 10050003
Scissor holder
Art. 1430062
Slide bearing
with lap joint
Art. 1430072
Locking washer
d1 = 7 mm
Art. 1430070
