3.2 Server Configuration
The unit’s server values display upon selecting
Server
from the main menu. The following sections describe the
configurable parameters within the Server configuration menu.
To configure the Wi232’s device server settings:
1. Click
Server
from the main menu.
2. Configure or modify the following fields:
Server Configuration
Telnet Password
Enter the password required for Telnet access.
Retype Password
Re-enter the password required for Telnet access.
Advanced
ARP Cache Timeout
When the unit communicates with another device on the network, it
adds an entry into its ARP table. ARP Cache timeout defines the
number of seconds (1-600) before it refreshes this table.
TCP Keepalive
TCP Keepalive time defines how many seconds the unit waits
during an inactive connection before checking its status. If the unit
does not receive a response, it drops that connection.
Enter a value between
0
and
60
seconds.
0
disables keepalive.
Monitor Mode @ Bootup
Select
Disable
to disable the entry into the monitor mode via the
'yyy' or 'xx1' key sequence at startup. This command prevents the
unit from entering monitor mode by interpreting the stream of
characters that are received during the device server's initialization
at startup.
CPU Configuration Mode
The Wi232 provides a high-performance mode that supports the
baud rates 460 Kbps and 921 Kbps. When running the serial port at
460 Kbps or 921Kbps, the CPU must be placed in the high
performance mode in order to keep the serial port within this baud
rate specification. The maximum serial speed when not in high
performance mode is 230 Kbps. The default is
Low.
HTTP Server Port
This option allows the configuration of the web server port number.
The valid range is 1-65535. The default HTTP server port number is
80.
3-4
Wi232/WiUSB User Guide
