S58.0.01.6C-03
Page 3 of 4
6. Attention:
Do not use this product as safety or emergency stopping device or in any other application
where failure of the product could result in personal injury or material damage. Failure to comply with
these instructions could result in serious injury and material damage.
4. Installation
For installation of the device drivers a user account with an administrator-authorisation is required.
If you haven’t an appropriate authorisation please consult your system administrator.
If you already have a device installed with the same USB-Chipset the adaptor will be installed
automatically, if not the system will request you to install the driver.
If the adaptor is correctly installed on your system you have, for application with our
software, a new additional COM-Port is available.
5. Specification
Connection:
PC:
Standard USB-plug connector (type A)
EASYBus:
connection jack M8 (3-pin) for direct connection of a T-Logg
Power Supply:
via USB-interface
Operating temperature:
0 ... +50 °C
Storage temperature:
-25 ... +70 °C
Cable length:
1 m
Weight:
40 g
EMC:
The device corresponds to the essential protection ratings established in the Regulations of the
Council for the Approximation of Legislation for the member countries regarding electromagnetic
compatibility (2004/108/EG).
In accordance with EN 61326:1997 + A1 :1998 + A2 :2001 (appendix B, class B).
5.1 System requirements:
• 1.0 GHz Dual Core Processor or higher
• Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1,
Windows Server 2003, Windows 2008, Windows 2008 R2,
(note: not suitable for Windows RT)
• free USB port.
