H41.0.02.6C-06
Operating Manual TFS 0100 E
page 2 of 4
Content
1
INTENDED USE ...................................................................................................................................................... 2
2
GENERAL ............................................................................................................................................................... 2
3
DISPOSAL .............................................................................................................................................................. 2
4
OPERATING AND MAINTENANCE ADVICE ........................................................................................................ 2
5
SAFETY REQUIREMENTS .................................................................................................................................... 3
6
SPECIFICATION ..................................................................................................................................................... 3
1
Intended use
The measuring probe is designed for the connection to a hand-held instrument of the following types:
GMH 3330
and
GMH 3350
The measuring probe is designed for measuring temperature and humidity.
2 General
Read through this document attentively and make yourself familiar to the operation of the device before you use it.
Keep this document in a ready-to-hand way in order to be able to look up in the case of doubt.
3
Disposal
This device must not be disposed as “residual waste”.
To dispose this device, please send it directly to us (adequately stamped).
We will dispose it appropriately and environmentally friendly
4
Operating and Maintenance Advice
a.) You must only use the measuring probe with GMH 3330 or GMH 3350 devices!
Usage of other devices may result in destruction of sensor and device.
b) Treat sensor and device carefully. Use only in accordance with above specification. (do not throw, hit against etc.).
Protect plug from soiling.
c) To disconnect the measuring probe do not pull at the cable but at the plug.
When connecting the sensor make sure that plug is entered into device socket centrally. Do not twist plug when
entering socket. If plug is entered correctly, it will slide in smoothly
If plug is twisted or entered incorrectly the connecting pins of the plug can be spoilt by bending or broken .
