H87.0.0X.6C-01
Operating manual G 7500 Series
page 8 of 34
3.4 support and retaining clip
The stand is provided as a means to prop up or support the device in a stable
surface, for hanging on the wall or for attachment to a belt.
Instruction
:
-
Leave the stand collapsed in order to lay the product flat on a stable surface or
to hang it on a belt.
-
Pull the grip labelled
open
in order to fold it out to a 90° angle. Now, the
product can be positioned on a stable surface.
-
Pull the grip labelled
open
again in order to fold it out to a 180° angle. Now the
product can be hung.
-
The product can be positioned ideally so that the display can always be read
clearly and easily depending on its use.
Pop-up clip closed
Pop-up clip at position 90°
Pop-up clip at position 180°
Device attached to a belt
Device set up on a table
Device suspended from
magnetic holder
GMH 1300
