H87.0.0X.6C-01
Operating manual G 7500 Series
page 3 of 34
12.1
R
ESHIPMENT
................................................................................................................ 32
12.2
D
ISPOSAL
..................................................................................................................... 32
13
SPECIFICATION .......................................................................................................... 33
13.1
MEASUREMENTS AND ACCURACY
................................................................................. 33
13.2
GENERAL SPECIFICATION
.............................................................................................. 34
14
TERMS OF LICENSE ................................................................................................... 34
14.1
F
REE
RTOS .................................................................................................................. 34
14.2
F
AT
FS .......................................................................................................................... 34
1
General Note
Read this document carefully and get used to the operation of the device before you
use it. Keep this document within easy reach near the device for consulting in case
of doubt.
2
Safety
2.1 Intended Use
The device is exclusively designed for measuring of pH and conductivity or pH and
dissolved oxygen in water (saltwater and freshwater).
Personnel which starts up, operates and maintains the device has to have sufficient
knowledge of the measuring procedure and the meaning of the resulting measured
values, this manual delivers a valuable help for this. The instructions of the manual
have to be understood, regarded and followed.
To be sure that there´s no risk arising due to misinterpretation of measured values,
the operator must have further knowledge in case of doubt - the user is liable for any
harm/damage resulting from misinterpretation due to insufficient knowledge.
The manufacturer will assume no liability or warranty in case of usage for other
purpose than the intended one, ignoring this manual, operating by unqualified staff
as well as unauthorized modifications to the device.
2.2 Safety guidelines
This device has been designed and tested in accordance with the safety regulations
for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the
standard safety measures and special safety advises given in this manual will be
adhered to when using the device.
2.3 qualified personnel
The device may only be installed by qualified personnel who have read and
understood this manual and who are able to use the devices professionally. Qualified
personnel are persons who are familiar with the installation, assembly,
commissioning and operation of these devices and who have the necessary
qualifications to carry out their duties.
