4
Operation
© 2019 GREINER GmbH
Instruction manual - MULTILINE NEXT DC
37 / 72
G
REI
N
ER_
mul
til
ine
_ne
xt
_d
c_
ma
nu
al
_EN
_4
22
55
02
_re
v_
2.d
oc
x
Adjusting the inclination
The inclination of the arm support (2) can be adjusted in 3 positions. To do this, disengage the locking pin (3) by
pulling. Slightly raise the arm support to relieve the load on the locking pin. Now incline the arm support down-
wards and then lock it again with the locking pin. Always hold the arm support when inclining and do not let it fall
freely.
2.
Arm support
3.
Locking pin (inclination)
Fig. 45 Arm supports - adjusting the inclination
Adjusting the height
The height of the armrest is continuously adjustable. To raise, turn the handwheel (4) clockwise and to lower,
unscrew it counterclockwise.
NOTE
Do not force the handwheel over the noticeable end position when in the highest position. When
the lowest position is reached, there is no longer any noticeable resistance on the handwheel.
4.
Handwheel (height)
Fig. 46 Armrests - adjusting the height
Swivelling
The arm support (2) can be swivelled inwards or outwards independently of the armrest. To do this, loosen the
handwheel (5) and swivel the arm support inwards or outwards, then retighten the handwheel.
2.
Arm support
5.
Handwheel (swivelling)
Fig. 47 Arm supports - swivelling
2
3
5
4
2