GREINER 0815502, Инструкция по монтажу и эксплуатации

Страница: 8 / 16

2 Mounting
8 / 16 - Mounting and operating manual © 2018 GREINER GmbH
08
1_
ins
truct
ion
-ma
nu
al
_EN
08
15
50
2_
re
v_
0.d
oc
x
2.3 Installing the seat in the vehicle
The installation of the retrofit seat in the vehicle is described here. Globally it can be said that the fixing screws
(usually 4) have to be removed and the retrofit seat has to be fixed to the vehicle structure by means of adapters
or brackets.
NOTE Due to the variety of vehicles, the enclosed instructions must always be observed, depending on
the version of the adapter or bracket used.
2.3.1 Electrical connection (option)
NOTE
The battery must be disconnected before working on the electrical system of the vehicle.
The security code for recommissioning the radio, navigation system etc. should therefore be avail-
able.
The switch can be positioned as required
(cable length).
When installing, observe the required di-
ameter of 20 mm and the position of the
recess for locking the switch.
Fig. 9 Electrical connection (option) - installation of the switch for heating in the seat and back (cable harness)
The electrical connection is protected by
fuses.
Fig. 10 Electrical connection (option) - circuit diagram for heating in seat and back (cable harness)