GREINER 0815502, Инструкция по монтажу и эксплуатации

Страница: 4 / 16

1 General
4 / 16 - Mounting and operating manual © 2018 GREINER GmbH
08
1_
ins
truct
ion
-ma
nu
al
_EN
08
15
50
2_
re
v_
0.d
oc
x
1 General
This mounting and operating manual (hereinafter also referred to as the "manual") also describe functions or fea-
tures that may not be included in your retrofit seat (hereinafter also referred to as the "seat").
We reserve the right to make technical changes without notice within the scope of further development of the
seat described in this manual.
The original of this manual was written in German. All other languages are translations of this manual.
Validity
This manual applies only to the seat and accessories supplied by GREINER GmbH (also abbreviated to GREINER).
Manufacturer
GREINER GmbH
Wettestraße 1
74385 Pleidelsheim / Germany
Phone: +49-7144-8112-0
Fax: +49-7144-8112-99
info@greiner-gmbh.de
www.greiner-gmbh.de
Note on pictorial representations
The photos / illustrations are general illustrations and may differ from the actual conditions or from the compo-
nents actually used.
Warranty and liability
Our General Terms and Conditions (GTC) apply in the currently valid version at www.greiner-gmbh.de.
In the event of a complaint (damage, defects or other reasons for complaint), your specialist distributor is the
appropriate contact person.
Disposal
During the construction of the seat, care was taken to ensure that, wherever possible, no composites were used.
This design concept allows a high degree of recycling once the seat has reached the end of its service life.
In the event of scrapping, dispose of metal and plastic parts separately and properly.
If you have any queries, please contact your local municipality, local waste disposal company or our service.
Country-specific disposal regulations must be observed!
1.1 Scope of delivery
Standard

Individually packed seats (reclining position)

Headrest removed and enclosed

Set of screws for fastening
6x cylindrical screw with flat head
(DIN 7984 M8 x 25 mm galv. strength class 8.8 polyamide coated)
6x internal toothed washer
(DIN 6797 I M8 galv.)

This mounting and operating manual
Option

Guide rail set (left and right running rail with release lever)

Vehicle-specific adapter or console

Armrest(s) with 2x fastening screws
(DIN 7991 M10 x 30 mm strength class 8.8 black polyamide coated version)