--------------------------------------------------STORAGE----------------------------------------------
WARNING: PREVENT INJURY. Read the chapter on Safety in detail and ensure that you are familiar
with it before proceeding.
Proceed as follows to prepare the machine if it is going to be stored for more than 30 days.
1
Allow the engine to run until the fuel has been used up. Refer to the engine manual for specific instructions on
preparing the engine for storage.
2
Remove all dirt from the machine. Refer to the chapter on Maintenance for cleaning instructions.
3
Inspect the machine for signs of wear and tear, breakage or other damage. Order the necessary spare parts and
implement the necessary repairs to prevent delays when you are ready to use the machine again.
4
Ensure that all nuts, bolts and screws are secure and that the machine is ready to be operated safely.
Fuel system
If fuel is left in the fuel system for a long time without stabilizer it will deteriorate in quality. Deposits can have an adverse effect on
the carburettor and fuel lines, fuel filter and tank. Prevent deposits in the fuel system during storage by adding a high quality
fuel stabilizer to the fuel. Stick to the mixing ratio recommended on the stabilizer packaging.
Prepare the fuel system for storage as follows:
1
Add the fuel stabilizer to the fuel in accordance with the manufacturer’s instructions.
2
Allow the engine to operate for at least 10 minutes after adding the stabilizer to ensure that it reaches the carburettor.
NEVER store the engine with fuel in the tank in a building where there might be potential ignition sources in the
vicinity.
SPARE PARTS
Remember to always use original spares to ensure that your
machine continues to operate as new.
Part no.
Number
.
Description
LP150ST14V
6
wire brush attachments
WISSELLEPEL
SW
1
key to fast replacement system
