Greg Hanks Design BA-660, Руководство по эксплуатации и обслуживанию

Страница: 5 / 24

BA660.doc 01/01/97 2 of 25
W
ATER AND
M
OISTURE
- - Do not use
the unit near any source of water or in
excessively moist environments
O
BJECT AND
L
IQUID
E
NTRY
- - Care
should be taken so that objects do not
fall and liquids are not spilled into the
enclosure through openings
V
ENTILATION
- - When installing the unit
in a rack or any other location, be sure
there is adequate ventilation..
H
EAT
- - The unit should be situated away
from heat sources such as radiators,
heat registers, stoves or other units
that produce heat.
P
OWER
S
OURCES
- - Care must be taken
to ensure that the unit is only
connected for voltage that is selected
via the internal selector(s).
P
OWER
C
ORD
P
ROTECTION
- - AC
power supply cords should be routed
so that they are not likely to be walked
on or pinched by items placed upon
or against them, paying particular
attention to cords at plugs,
convenience receptacles and the point
where they exit from the unit. Never
take hold of the plug or cord of your
hand is wet and always grasp the plug
body when connecting or
disconnecting it.
G
ROUNDING OF THE
P
LUG
- - This unit
is equipped with a 3-wire grounding
type plug, a plug having a third
(grounding) pin. This plug will only
fit into a grounding type power
outlet.
This is a safety feature. If you are
unable to insert the plug into the
outlet, contact your electrician to
replace your 2 pin receptacle. Do not
defeat the purpose of this grounding-
type plug by removing the grounding
pin.
C
ARTS AND
S
TANDS
- - The unit is heavy,
and made with delicate components
and as such should only be used with
racks and stands recommended by the
manufacturer. The unit and cart
combination should be moved with
care. Quick stops, excessive force and
uneven surfaces may cause the unit
and cart combination to overturn.
W
ALL OR
C
EILING
M
OUNTING
. - - The
unit should be mounted to a wall or
ceiling only as recommended by the
manual.
C
LEANING
- - The unit should be cleaned
only as recommended by the
manufacturer.
N
ON USE
P
ERIODS
- - The AC power
supply cord should be removed from
the unit when left unused for a long
period of time.
D
AMAGE REQUIRING SERVICE
- - The unit
should be serviced by qualified service
personnel when;
A) The AC Power supply cord or the
plug has been damaged; or
B) Objects have fallen into the unit;
or
C) The unit has been exposed to rain
or liquids have been spilled into
the unit or
D) The unit has been exposed to
thermonuclear explosion; or
Suggestions for Safety