GreenWorks STG304 Скачать руководство пользователя страница 4

1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.

1.2

OVERVIEW

1

Trigger

2

Lock-out button

3

Auxiliary handle

4

Upper shaft

5

Cam lever

6

Lower shaft

7

Edge button

8

Cut-off blade

9

Edge guide

10

Trimmer head

11

Guard

12

Edging guide wheel

13

Pivoting head adjustment button

1.3

PACKING LIST

1

String trimmer bare
tool

2

Auxiliary handle
assembly

3

Guard assembly

4

Operator manual

2

IMPORTANT SAFETY

INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING (THIS
POWER TOOL)

 

WARNING

Read and understand all instructions before using this
product.

 Failure to follow all instructions listed below may

result in electric shock, fire, and/or serious personal injury.

Use only identical manufacturer’s replacement parts and
accessories. Use of any other parts may create a hazard or
cause product damage.

Always wear safety glasses with side shields marked to
comply with ANSI Z87.1. Everyday glasses have only
impact resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury. Use
face mask if operating in dusty work spaces.

Avoid Dangerous Environment – Don’t expose power
tools to damp or wet conditions. Water entering a power
tool will increase the risk of electric shock.

Don’t use in rain.

Keep all bystanders, children, and pets at least 50 ft.
away.

Dress Properly – Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber gloves
and substantial footwear is recommended when working
outdoors. Wear protective hair covering to contain long
hair.

Use right Appliance. Do not use appliance for any job
except that for which it is intended.

Avoid Unintentional Starting – Don’t carry appliance
with finger on switch. Be sure switch is off when battery
is plugged in.

Don’t Force Appliance – It will do the job better and with
less likelihood of a risk of injury at the rate for which it
was designed.

Don’t overreach – Keep proper footing and balance at all
times.

Stay alert – Watch what you are doing. Use common
sense. Do not operate this unit when you are tired, ill or
under the influence of alcohol, drugs or medication.

Always store idle power tools indoors – When not in use,
power tools should be stored indoors in a dry and high or
locked-up place, out of reach of children.

The machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction

4

English

EN

Содержание STG304





























Отзывы: