![GreenWorks PS24B00 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/greenworks/ps24b00/ps24b00_operators-manual_2263669012.webp)
•
Sharpening the chain many times but it does not
increase the cutting speed. The chain is worn.
9.3
GUIDE BAR MAINTENANCE
NOTE
Make sure that the bar is turned over periodically to
keep symmetrical wear on the bar.
1. Lubricate the bearings on the nose sprocket (if
present) with the syringe (not included).
2. Clean the bar groove with the scraping hook (not
included).
3. Clean the lubrication holes.
4. Remove burr from the edges and level the cutters
with a flat file.
Replace the bar if:
•
the groove does not fit with the height of the drive
links (which must never touch the bottom).
•
the inside of the guide bar is worn and makes the
chain lean to one side.
10
TRANSPORTATION AND
STORAGE
Before you move the machine, always
•
Remove the battery pack from the machine.
•
Keep hands clear of the lock-out button.
•
Put the scabbard on the guide bar and the chain.
Before you put the machine into storage, always
•
Remove all residual oil from the machine.
•
Remove the battery pack from the machine.
•
Clean all unwanted material from the machine.
•
Make sure that the storage area is
•
Not available to children.
•
Away from agents which can cause corrosion,
such as garden chemicals and de-icing salts.
11
TROUBLESHOOTING
Problem
Possible cause Solution
The machine
does not start.
The poles are
not assembled
correctly.
Assemble the
poles according
to the instruc-
tions.
The lock-out
button and trig-
ger are not de-
pressed at the
same time.
1. Push and
hold the
lock-out but-
ton
2. While you
hold the
lock-out but-
ton, pull the
trigger.
3. Release the
lock-out but-
ton to start
the machine.
The bar and
chain gets hot
and smokes.
Oil tank is emp-
ty.
Fill the oil tank.
The discharge
port is blocked.
1. Remove the
battery pack.
2. Remove dirt
from the dis-
charge port.
Inlet opening of
inner oil tank is
blocked.
1. Clean the oil
tank.
2. Fill with
clean bar
and chain lu-
bricant.
The sprocket is
stuck and clog-
ged with debris.
1. Clean the
sprocket.
2. Fill with
clean bar
and chain lu-
bricant.
12
English
EN
Содержание PS24B00
Страница 2: ......
Страница 42: ...N N pieza Cant Descripci n N N pieza Cant Descripci n 7 32209590 1 Pinza 14 34112320 2 1 Vaina 42 Espa ol ES...
Страница 43: ......
Страница 44: ...www greenworkstools com P0802850 00 Rev B...